![]() ![]() Here, you can check to see if an Area value is provided or if the words "Not closed" are present. You can confirm that a polyline is closed by opening its specification dialog and accessing the Polyline panel.Using the Draw Line tool, draw a horizontal line starting from the bottom of the profile until the end point aligns with the the top edge, then draw a vertical line connecting them together.Select Window> Fill Window to see the results so far.In this example, 168" (14') is specified. Enter an appropriate Length for the top edge of the beam or joist.Select the End Point radio button under the Lock section.On the Selected Line panel of the Polyline Specification dialog that displays:.When the profile is defined to your liking, select the top horizontal edge of the profile, then click on the Open Object edit tool.Note: If this decorative profile will be used in future projects, or as a rafter tail for roof rafters, consider selecting the CAD polyline and clicking the Add to Library edit tool to add it to your User Catalog. Once the size is to your liking, make sure to switch back to the Default edit behavior. If you would like to maintain the same shape and proportions, but increase the overall size, you can do so using the Concentric edit behavior found by navigating to Edit> Edit Behaviors.Use the Change Line/Arc edit tool to change a selected edge from a straight line into an arc, or vice versa.Use the Break Line edit tool to add breaks or corners to a polyline's edges.If further adjustments need to be made to the CAD polyline, use the various edit handles and edit tools when an edge is selected.In this example, the RT12 profile located in the Rafter Tails subfolder is used. If you choose a profile from the library, right-click on it, select Place Molding Profile from the contextual menu, then click in the section view to place a CAD polyline of the profile. You can also use the existing profiles that are located in the Library Browser under Chief Architect Core Catalogs> Architectural> Moldings, Profiles, Extrusions for this process. ![]() It's important that the height of the decorative end is appropriately sized for the framing member that it will be applied to, and that the lines and arcs that make up the decorative end are connected at their end points to form a single CAD polyline object. In the section view, use the various CAD tools, such as Draw Line and Draw Arc, to define the decorative end to your liking.Create a New Plan, navigate to 3D> Create Orthographic View> Cross Section/Elevation view, then click and drag in an area of your plan to create a section view. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |